SUPPORT - MANUALS & DOWNLOADS
Instrument Inspector Targets

Instruments built-in White Calibration Plaque

This is a very special kind of target - Today, all instruments are equipped with built-in White Calibration Plaque. Typically the caibraion plaque is made of ceramic tile, sometimes it is a plastic element.   Instrument Inspector enables the user to track how the desired instrument measures its own calibration standard. This is an easy way to understand how the instrument works.

Instrument Inspector enables the user to track how instrument measures its own calibration standard. This is an easy way to understand how the instrument works. 

Caution: there is a limited sense to compare two instruments based on Calibration Plaque baselines - different instruments measure different targets - take it into account!

 

How to measure White Calibration Plaque? 

For the most instruments, there is no problem to measure calibration tile, but for some like X-Rite iSis, it is impossible. Some require simple tricks. 


X-Rite eXact

Instead of the normal way of triggering the measurement, press the small rod at the bottom of the instrument as shown below:

 

 

Software templates that drive calibration plaque measurements

basICColor Catch

Alwan Print Verifier  (APV) White Calibration Plaque.jobTemplate