CC Capture

Technical requirements | General recommendation

CC Capture supports the following platforms and operational systems:


• PC: Windows 7, Windows 8, Windows 10 - both 32-bit, 64 bit

• Mac: OsX (Intel) 64-bit (tested on 10.13.6 High Sierra)


Minimal PC hardware requirements:

We have successfully tested Capture launched on low-cost Windows 10 Tablet equipped with 8- inch 1280 x 800 touch-screen. The minimal configuration may be defined by this inexpensive device:

Sample Windows 10 Tablet configuration:

  • Intel Atom Z3735G Quad Core, 4x 1,83 GHz, 2 MB Intel® Smart Cache
  • Intel HD Graphics,
  • Display: 1280 x 800 pixels
  • RAM: 1 GB (DDR3)
  • Storage memory: 16GB
  • WiFi 802.11b/g/n (2,4GHz)
  • Bluetooth
  • micro-USB 2.0 

We recommend using Tables equipped with two or more USB and separate power supply socket - in most application Tablet require permanent powering.

Setting "tablet mode" will make easy to use a system on-screen touch keyboard

An external USB hub (power supply, Instrument, Bar-code reader, Ethernet card may be useful especially when wi-fi access is restricted.



General recommendation:

We strongly recommend using the following supplementary solution:

  1. ChromaChecker Backer - for all instrument except iSis family instruments
  2. Barcode Reader (any 3-rd party)* for precise and error-free task definition
  3. Track your Instrument repeatability at least once a week – for single measurement condition it takes about a minute or two to verify (depending on the instrument). To track your instrument a mid-term ChromaChecker Targets (x-42, B-42 or I-42) is the most effective way


*/ iPhone users would be able to share iPhone as barcode reader soon