CC Uploader new file name filtering

2018-11-27

File Name Recognition Feature

You may specify the filename that will parse naming convention. 

You may want to define the different task for the same subfolder. 

In some situations, files use a naming convention that has to be filtered to select a specific type of name
 

Example:

 
One subfolder can store measurements from different presses/ print conditions:
LS0000795-coated_135-333278-IC1-2013_07_12-Sheet7-Prinect_Fogra4-1.txt
LS0025448-uncoated_90-333278-IC1-2013_07_12-Sheet7-Prinect_Fogra4-1.txt
T007-pvc-01-IC2-2013_08_13t11_46_43-sheet1-sheet1-tvi_l_colorcal35-4.txt
 
in this case we can find following strings :
-IC1- - data from press_01
-IC2- - data from press_02 
-coated_135-  substrate/print condition A
-uncoated_90- substrate/print condition B
-pvc-  substrate/print condition C 
 
a. To select all jobs from Press 01 printed on Coated paper enter: 
 

*-coated_135-*-IC1-*.txt

 
b. To select all jobs from Press 01 printed on Uncoated paper enter: 

 

*-uncoated_90-*-IC1-*.txt

 

c. To select all jobs from Press 02 printed on PVC enter: 

 

*-pvc-*-IC2-*.txt

 


 

Regex

In addition to wildcard selection, a Regular Expression based exclusion is implemented. 
A regular expression (regex) is a sequence of characters that define a search (exclusion) pattern.
If you are not familiar with how to use Regular Expression you visit https://regexr.com  



# SEE RECENT IMPROVEMENTS

PPrint Inspector

Spot Color Wildcards add to any Colorbar

Have one color bar that allows for assessing process color only or up to any combination of up to four brand/spot

LEARN MORE ›››

HColor Inspector

Visualize Spot Color Tolerance Values

Delta E is not sufficient as the only tolerance criteria to define brand/spot color conformance due to the non-linearity of colors in the LAB color space

LEARN MORE ›››

CCapture

Multi-page charts for CC Capture (i1iO)

Instruments like X-Rite i1iO have some limitation caused by limited scanning area. IT-8 or TC-1617 are typical examples where single page is too small, and the only way is split task into two or more pages. Now Capture is supporting Scanning templates where each page is defined separately - next joined into multipage measurement task.

LEARN MORE ›››

PPrint Inspector

Comparing Spot Colors to one another

When comparing Print tracks, ChromaChecker shows the E-Factor difference between each track, now it includes spot colors

LEARN MORE ›››

HColor Inspector

Setting different Tolerances in Library

Ability to set different tolerances on different colors within the same Color Library

LEARN MORE ›››

CCapture

CC Capture Operator Log in via RFID

If Employees have bar codes, or RFID cards, they can use either of these devices to automatically log into CC Capture (ver. 1.1. is required). In multi-user mode RFID card can switch all setting for another operator in three seconds including sending all new parameters to the Instrument.

LEARN MORE ›››