P

Print Inspector

B

NEW FEATURES

HP Color Beat Supported

2018-11-22

If you run series 4 Indigo Press, ChromaChecker can now automatically import the measurement data from the in-line spectrophotometer on the HP press and show you how the press is manufacturing color over time. You can configure how often the measurement is done, and ChromaChecker will pull the measurement in, and show the operator through the iPhone App, the iPad App, or the web browser how the printer is performing. See the history: the purple line shows the variation to the sheet defined as the baseline. The blue line represents the variation within each page (since the target has duplicate patches), and the gray line represents the variation of the substrate. This graph is showing the last 480 measurements.

 

The operator can enter the maintenance events done on the Indigo to see what affect the changing of the PIP and performing different calibrations have on the overall performance of the printer. This is extremely useful to learn what needs to be done to keep the Indigo in the desired printing condition which will meet your customer expectations.

# SEE RECENT IMPROVEMENTS

PPrint Inspector

Spot Color Wildcards add to any Colorbar

Have one color bar that allows for assessing process color only or up to any combination of up to four brand/spot

LEARN MORE ›››

HColor Inspector

Visualize Spot Color Tolerance Values

Delta E is not sufficient as the only tolerance criteria to define brand/spot color conformance due to the non-linearity of colors in the LAB color space

LEARN MORE ›››

CCapture

Multi-page charts for CC Capture (i1iO)

Instruments like X-Rite i1iO have some limitation caused by limited scanning area. IT-8 or TC-1617 are typical examples where single page is too small, and the only way is split task into two or more pages. Now Capture is supporting Scanning templates where each page is defined separately - next joined into multipage measurement task.

LEARN MORE ›››

PPrint Inspector

Comparing Spot Colors to one another

When comparing Print tracks, ChromaChecker shows the E-Factor difference between each track, now it includes spot colors

LEARN MORE ›››

HColor Inspector

Setting different Tolerances in Library

Ability to set different tolerances on different colors within the same Color Library

LEARN MORE ›››

CCapture

CC Capture Operator Log in via RFID

If Employees have bar codes, or RFID cards, they can use either of these devices to automatically log into CC Capture (ver. 1.1. is required). In multi-user mode RFID card can switch all setting for another operator in three seconds including sending all new parameters to the Instrument.

LEARN MORE ›››