Multi-page charts for CC Capture (i1iO)

2019-02-06

Instruments like X-Rite i1iO have some limitation caused by limited scanning area. IT-8 or TC-1617 are typical examples where a single page is too small, and the only way is to divide the task into two or more pages. Now Capture is supporting Scanning templates where each page is defined separately - next joined into multipage measurement task.

To take advantage of multi-page scanning feature CC Capture 1.1 is required. This new software is being tested now and will be available in the download area soon.

 

How to

 

  1. Create Scanning templates for each single page



  2. Select all pages (checkboxes) and click "Create multipage task" on the bottom



  3. Set task name, page order and save it. From this moment a new section should appear.

 

Now you can select your multi-page scanning template from CC Capture.

 

# SEE RECENT IMPROVEMENTS

PPrint Inspector

Spot Color Wildcards add to any Colorbar

Have one color bar that allows for assessing process color only or up to any combination of up to four brand/spot

LEARN MORE ›››

HColor Inspector

Visualize Spot Color Tolerance Values

Delta E is not sufficient as the only tolerance criteria to define brand/spot color conformance due to the non-linearity of colors in the LAB color space

LEARN MORE ›››

CCapture

Multi-page charts for CC Capture (i1iO)

Instruments like X-Rite i1iO have some limitation caused by limited scanning area. IT-8 or TC-1617 are typical examples where single page is too small, and the only way is split task into two or more pages. Now Capture is supporting Scanning templates where each page is defined separately - next joined into multipage measurement task.

LEARN MORE ›››

PPrint Inspector

Comparing Spot Colors to one another

When comparing Print tracks, ChromaChecker shows the E-Factor difference between each track, now it includes spot colors

LEARN MORE ›››

HColor Inspector

Setting different Tolerances in Library

Ability to set different tolerances on different colors within the same Color Library

LEARN MORE ›››

CCapture

CC Capture Operator Log in via RFID

If Employees have bar codes, or RFID cards, they can use either of these devices to automatically log into CC Capture (ver. 1.1. is required). In multi-user mode RFID card can switch all setting for another operator in three seconds including sending all new parameters to the Instrument.

LEARN MORE ›››