CC Capture

X-Rite i1 iO Family


  • Supported instruments: i1Pro iO 1, i1Pro iO 2

  • Modes: Spot, Scan

  • M-Condition supported: M0, M1, M2 (depending on the instrument)

  • Inspectors: Print Inspector, Instrument Inspector, Lighting Inspector

  • Soon: Color Inspector,


Features / unique benefits:

  1. Auto scan/spot selection. The instrument will adjust the speed of scanning or if require switching to spot mode automatically - no user intervention is required
  2. Bar-code support for Scanning Template selection and description.
  3. Corner-based / crosshair positioning definition bring more accurate results.
  4. Stored positioning for instant measurements.
  5. Motorised Positioning for accurate definition - instrument will show current positioning. When the origin of the first corner is defined - The instrument will predict next corner locations. The user may adjust the position
  6. Keyboard control for accurate positioning - the user may define positioning using keyboard arrows - single click - single step of step-motor.
  7. Positioning can be temporary remembered - enables fast rescan even when scanning template doesn’t contain coordinates.
  8. The user may read real position of the cross-hair (if manual editing is required)
  9. VCS: Virtual Control-Strip - spot mode measurement for any location on the sheet - The user may define virtual control-strip - a list of coordinates where the instrument has to go and measure. A list may contain dozen of location. A control strip definition is required to list reference values. A CMYK, Hi-Fi, RGB, Spot, Lab and Special patches can be mixed.
  10. Learning mode for VCS - the user may teach instrument where are all point that Instrument should measure




  1. Track your instrument with Instrument Inspector Target frequently.
  2. ChromaChecker Backer for iO is strongly recommended - Errors caused by improper backing might be more than ∆E00=2 (Standard Proofing Paper)
  3. CC Backer extend real measurement area by 30%
  4. Calibration Standard (white plaque), as well as optical path, have to be cleaned
  5. Launch X-Rite i1Diagnostic (free utility) to check Instrument and lamp restore procedure at least semi-yearly.
  6. Make sure that your USB socket delivers enough power and you are using high-quality connection cable.
  7. Be sure that environmental conditions (RHT) are in the recommended range