Specification
Technical specification
| Parameter | Value |
| Repeatability (Short Term)* | 0.05 ΔE00 on white |
| Inter-Instrument Agreement** | 0.35 ΔE00 average, 1.0 ΔE00 max |
| Optical Geometry | 45º/0º ring illumination optics |
| Aperture | 2 or 5 mm diameter (different instruments) |
| Spectral Range | 400 - 700 nm |
| Spectral Interval | 10 nm |
| Light Source | High CRI, broad-spectrum LED light source (White, Violet, and UV) |
| Illumination spot size | 10 mm+ (0.39”) diameter |
| Measurement Conditions (ISO 13655:2017) | M0 – UV included – ISO 13655:2017, M1 – D50 – ISO 13655:2017, M2 – UV excluded – ISO 13655:2017 |
| Sensor | Diffraction grating with 288-pixel diode array |
| Measurement speed | 1 reported scan/second |
| Connectivity | USB Cable, BT*** 4.0 |
| CC Capture support | Windows 10 • Apple Mac |
| Dimensions | 45mm X 60mm X 60mm (1.77” X 2.36” X 2.36”) |
| Weight | 110g (3.9oz) (Accessories not included in weight) |
| Materials | Durable, matte black powder-coated aluminum enclosure |
| Haptics | Vibration feedback, RGB feedback |
* D65, 10°, to mean of 10 measurements every 3 s on white, at a temperature of 23ºC
** deviation from Nix Sensor Ltd. standard unit at a temperature of 23ºC on 12 BCRA tiles (D65, 10º)
*** coming soon
Features:
- Tempered glass protective lens
- Dust and water-resistant
- Hardpoint for braided aircraft cable attachment
Case content:
Optional adapters:
 |
 |
|
| Nix QC Flat Adapter | Nix QC Liquid & Powder Adapters | |
Liquids and powders are typically challenging to measure accurately without a specialized container. Our Liquid and Powder Adapter systems allow for easy measurement of all liquids and powders, using standardized slides or cuvettes. These adapters ensure a flat, uniform measurement interface, meaning you can be certain all measurements are highly precise and repeatable.
|
|
Surfaces that are uneven, textured, plush, or soft can often be difficult to measure accurately. When the scanned surface has areas that are raised or lowered, light from the device will reflect at different points, and the values received will be swayed and inaccurate. To avoid poor scanning conditions such as those, the Flat Adapter can be attached to the bottom of the Nix QC. This creates a uniform surface scan with consistent and accurate results. Use case examples
Please note: With the Flat Adapter attached, you may see L-values that are lower than those seen without the Flat Adapter due to light geometry. If you are using a Flat Adapter to measure your products, it is important to remember to set the master color while using a Flat Adapter as well. This way, you are comparing apples to apples. |
