January 18, 2023
BrandQ PreMedia Specify Plates Audit 3
Platemaking Requirements:
- Platemaking Standard operating procedures for checking plates, and performing routine monthly or quarterly audit on entire process
https://chromachecker.com/other_tools/en/manual/platesetter - Platemaking Checklist including how often to measure plates
- Plate control bar positioned automatically to image on every plate
https://chromachecker.com/other_tools/en/manual/dotinsp - Plate control bar file rendered at correct resolution
https://chromachecker.com/other_tools/en/manual/dotinsp - Plate-reader instrument
https://chromachecker.com/other_tools/en/manual/tsp - Plate-reader instrument verified that it is measuring consistently (NEW)
- Define nFactor (if required)
- Plate control targets
https://chromachecker.com/other_tools/en/manual/dotinsp - Procedure to measure to create and check linear plate
https://vimeo.com/331799652 - Procedure to measure to check curved plate
Contact ChromaChecker Support
Additional information and Support Form is available for logged users.