Support
- Intro
- Inspectors
- Print Industry
- Brand & Print Buyers
- Color Manufacturing
- Design & Photography
- CC Products
- Tests & Audits
- Trainings
- CC-2D Barcode Reader
- RHT wireless datalogger (discontinued)
- RHT USB Sensor/DataLogger
-
CC Measurement Backer
- ChromaChecker Nano
-
Manager or Operator Cloud Interface
-
Troubleshooting CC-2D Barcode Reader
-
CC XY-table
-
CC Capture
- Summary of Standard Color Bars And Applications
- Connect Capture
- Control Strip Library
- Quick Start — CC Capture
- CC Capture Technical Requirements
- CC Capture Features
-
Supported Instruments
- X-Rite i1 Pro
- X-Rite i1 iO
- X-Rite i1 iSis
- X-Rite eXact
- X-Rite eXact2
- Myiro-1
- Techkon SpectroDense
- Calibrate ColorChecker Studio (Xrite i1Studio)
- CC Sphere Portable Spectrophotometer
- Variable Spectro 1 (Bridge)
- Spectro with Bridge
- X-Rite ICPlate2
- NIX Spectro 2
- Veoria DeltaOne and DeltaWeb
- Techkon SpectroPlate
- CC-380 Triple Angles Gloss Meter
- CC-XY Table S
- Introduction to QuickChecker Interface
- CC Capture Print Inspector
- CC Capture and Barcodes
- CC Capture
- CC Capture Substrate Inspector
- CC Capture Color Inspector
- QuickStart — Measure Lighting Condition
- CC Capture Plate Inspector
- No Instrument Color Grid
- Troubleshooting CC Capture
- 3rd party devices
- CC Capture download
- Trial vs. Registered Version
- Instruments Inspector Targets
-
Substrate Inspector B&W Backer
- E-Factor Exercise/Sampler
- CC Uploader
-
CC Connect
CC Products »
CC Capture »
Introduction to QuickChecker Interface »
Refer to Assets (Library, Pallete)
January 11, 2023
Refer to Assets (Library, Pallete)
Compare to Assets is the method where your Reference is already in one of CC Repository Assets: Libray or Palette.
- Take sample measurement
- In Compare Window select "Compare to Assets - select the proper source
- Done!
Now you may want to change Report Tab according to your needs
Notes:
- If Your Instrument took all M-condition data in a single pass - and your Assets have multi-M-condition data - you may change Color Specification without repeating the measurement.
- Please note that you may use Autorecognition or select Reference from the assets intentionally. In this mode closest ∆E2000 value for the selected Color Specification will be searched
- All calculations are post-measurement - the user may change the Reference at any time
Contact ChromaChecker Support
Additional information and Support Form is available for logged users.