ChromaChecker

X-Rite 939

To drive instrument, X-Rite Color Port 2.0.5 has to be installed first and dedicated .xml file imported by Target Manager or copied manually to:

ColorPort_Resources/Refs/RGB Folder in your ColorPort Directory

Before data capturing don't forget to clean calibration base, next calibrate instrument

Launch ColorPort, on the Measure Target tab at top menu.

Choose the pop up menu under the word: Target and choose the downloaded ChromaChecker .xml file (Target).

Make sure the 939 is selected under the "Measurement Device" pop up menu, and click on the "Connect" button to establish a connection with instrument

Manually measure all 42 patches in order directed by software. Start from black patch (left top corner)

After measurement, Click on Save and Save as XRGA CGATs format as shown below:

Your data is now ready to upload to your Chromachecker account.

Upload data to your ChromaChecker account.

Instrument Inspector Manual

To use Instrument Inspector one of ChromaChecker™ Instrument Inspector
Targets is required. To buy visit to IDEAlliance