There are a few basic decisions to be made before you get started. First, you have to choose which Target is best for your instrument(s). Then you need to order one or two targets depending on the type of instruments that you want to track. Next, you will setup your subscription, the subscription configures how many instruments can be used with one target. If you are in a color mission critical situtation, you may want to order two targets, one for everyday use, and a second as a backup. 

Target – select the proper one, then order it on-line or through your dealer.

       

Choose your Target - we manufacture three variations of the same target depending on your measurement devices. If you have an Intellitrax, purchase the I-42, if you have DTP70, purchase the X42, for Barbieri Instruments e.g. LFP choose the U42. Read the on line manual on the web site to configure your target to work with your instrument(s). Download setting files prepared to drive your instrument/ software.

You can order selected target on-line. Payment methods are: Credit Card or PayPal

>>>  more about Instrument Inspector Targets

Quick Start Guide – simple 4 initial steps.

1. Follow the steps of selected instrument's manual –  measure the target multiple times (recommended at least 10 times) to build a base of data to represent your devices baseline, name the files using the device name, device serial number and serial number of target. 
   
   
2. Log on Web site (chromachecker.com) to add instrument, and then register your target. Depending upon the subscription you order, your target can be used with one or more instruments.
   
   
3. Select your instrument and click on the Upload Button to upload your data from your instrument (ideally 10 plus measurement files to represent the baseline), shift click to select all the files at once.
   
   
   
   
4. Select all your data and then click on the Smart Baseline button. Name your Baseline. 

CONGRATULATIONS: Now your instrument has a Smart Baseline that represents the "normal" condition of the device

>>>  more about Quick Start Guide – simple 4 initial steps

Instrument Inspector Manual

To use Instrument Inspector one of ChromaChecker™ Instrument Inspector
Targets is required. To buy visit to IDEAlliance

Instrument Inspector – How does it work?
Why use Instrument Inspector?
Instrument Inspector Target
Baselines and data averaging
How to start-up?
Instrument Inspector menus - how to navigate?
Easy mode / Expert mode 
Data sharing 
Instrument's comparison
Instrument’s compatibility list
General rules
FAQ
Tricks and Tips

Supported Instruments – manuals
X-Rite i1 Pro 1 
X-Ritei1 Pro 2
X-Rite i1iO
X-Rite iSis
X-Rite DTP-70
X-Rite Intelitrax
X-Rite eXact – manual mode
X-Rite eXact – scan mode
X-Rite 530
X-Rite 939
X-Rite SpectroEye & other from X-Rite
Techkon Instruments
Barbieri instruments